Features

1. Application:
CHTCFSP1235G intelligent fiber slurry paver, improved is mainly applied to treat the pavement diseases like friction resistance reduction, cracks and ruts for improving its performances of anti-slide and waterproofing, evenness and travelling comfort. This equipment can be widely used in construction of slurry seal, modified slurry seal, micro surfacing and fiber micro-surfacing.

CHTCFSP1235G intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage transported into a mixer,formed by the rapid mixing of emulsified asphalt slurry mixture into the paver box, by spiral dosing uniformly flat paving the road.

CHTCFSP1235G intelligent fiber slurry paver is a special equipment in Slurry seal construction technology ,Micro-surfacing construction technology,  Fiber Micro-surfacing construction technology. to meet the slurry seal short mixing time, forming speed, paving thickness thin, to achieve the construction of fast, low cost, wide application , saving energy etc.

2.Construction Technology:

Slurry Seal Construction Technology:

That means a slurry seal of emulsified asphalt slurry seal with the appropriate graded stone chips and sand aggregate, emulsified asphalt as binder, adding a certain percentage of filler (cement, lime, fly ash, slag, etc.) , additives and water and other materials, through mixing uniformity of slurry mixture, and uniform thickness and width of paving as required in the pavement of asphalt surface treatment thin layer.


Micro-Surfacing Construction Technology:

Micro-surfacing is the use of special equipment, the polymer modified asphalt emulsion, appropriately graded aggregate, filler (cement, lime, fly ash, slag, etc.), water and additives, after a reasonable proportion mix was stirred to form a uniform slurry mixture, and paving on the road quickly and evenly, lamellar structures open traffic within 1 to 2 hours after paving.


Fiber Micro-Surfacing Construction Technology:
CHTCFSP1235G intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage to mix to slurry mixture , paving with a high slip resistance and durability of the thin layer structure and can open traffic soon.Its different from Micro-surfacing construction technology is  grading (gap grading) and fiber to add.

Fiber in asphalt mixture of asphalt can effectively improve the gel structure to form a three-dimensional dispersion form, play a reinforcement effect, and make asphalt, slag, etc. in the asphalt mixture is uniformly dispersed, can effectively prevent the micelles and oil spillage. The advantage is to improve the road surface friction resistance, durability and resistance to fatigue, has a good absorption capacity, resistance to deformation, super waterproof, can effectively prevent cracks in the road surface reflection, greatly extend the pavement life. Adding fiber micro-surfacing pavement life can increase about 30%, about 50% reduction in the amount of rutting.

微信图片_20181114172815

6

3. Main performance:

910

1)The control system using artificial intelligence technology to achieve automatic monitoring of the environment and material conditions, automatic adjustment of operating parameters and have manual control experience learning and intelligent parameter memory. Manual-Auto control system achieve the dual security of the control system;

2).The optimization and upgrading of the auxiliary engine system and several sets of independent hydraulic power system provide the whole system a strong, sustained and stable power source;
3).The innovative structure of the mixing device, the use of high-intensity high-wear-resistant blades.It’s powerful, effective and adapted to slope road construction;
4).The unique hopper, baffle cone and chain belt conveyor make aggregate transport more fluid and stable.
5).The unique fiber supply system, small size, accurate measurement, uniform fiber cutting.
6).The double spiral propeller system can pave and secondary mix, effectively avoid the slurry segregation. Automatic telescopic structure, can meet the requirements of different road construction, adjust the camber according to the construction need.
7). 13m³ large hopper improve working efficiency;
8). Max3.5t/min mixing amount can meet the need of different width,thickness and technology;
9).Famous brand of key units are adopted,guarantee the reliability and stability;

10).New appearance design, reasonable, beautiful and generous.


4. Cases:

12

Specification

No.

Name

Unit

Standard value

Remarks

1

Chassis brand

 

Shaxman-X3000

 

2

Chassis model

 

SX1310XB6

 

3

Over weight

t

31

 

4

Engine power

kW

276

375hp

5

Emission standard

 

Euro

 

6

Cab

 

X3000

 

7

Min. speed

km/h

≤1

 

8

Auxiliary engine power

kW

119

160hp

9

Aggregates Hopper Volume

13

 

10

Emulsion Tank Volume

4.2

 

11

Water Tank Volume

4.2

 

12

Additive Tank Volume

L

400

 

13

Filler Tank Volume

2×0.5

Two hoppers

14

Fiber Tank

0.2

 

15

Amount of  Fiber

kg/min

≤3.5

 

16

Discharging Volume of Mixer

t/min

≤3.5

 

17

Width of Paving Tank

m

2.5~4.3

adjustable

18

Paving Depth

mm

3~15

 

19

Overall Dimensions

mm

11820×2496×3490

L×W×H



CHTCFSP1235G Slurry Paver